afe

The BladeRunner 3.5" intake manifold represents the next generation in intake manifold design. The BladeRunner intake manifold uses the patented MDV (Multiple Directional Vane) technology to guide the air through the manifold maximizing air flow. Constructed out of cast A356-T6 aluminum and using a...

BladeRunner 3-1/2 IN to 3 IN Intercooler Tube Cold Side Black Ford F-150 18-19 V6-3.0L (td)This Part Fits: Year Make Model Submodel 2018-2020 Ford F-150 King Ranch 2018-2020 Ford F-150 Lariat 2018-2020 Ford F-150 Platinum 2018-2020 Ford F-150 XL 2018-2020 Ford F-150 XLT

Flow and Performance: Smooth transitions in the mandrel-bent aluminum tubing decrease turbulence and minimize pressure loss, increasing horsepower and torque.Wrinkle Black Powder-Coated Finish: Not only does the black powder-coated finish make for a striking look, but it also insulates the tube from engine heat...

The Bladerunner charge pipes produce 20 hp and 63 lbs./ft/ torque and outflow the factory tubes by 45 percent. With the increased flow of this Charge Pipe it will reduce you exhaust gas temperatures by 100 deg..This Part Fits: Year Make Model Submodel 2016-2022...

Perfect Fit:This tube kit includes high quality, stainless steel, spring loaded T-bolt clamps and heavy-duty, 5-ply polyester reinforced silicone couplings for superior strength and durability.This Part Fits: Year Make Model Submodel 2001 Chevrolet Silverado 2500 HD Base 2001 Chevrolet Silverado 2500 HD LS 2001...

BladeRunner 3 IN Aluminum Hot and Cold Charge Pipe Kit Black Dodge RAM 1500 EcoDiesel 14-18 V6-3.0L (td)This Part Fits: Year Make Model Submodel 2014-2015 Ram 1500 Big Horn 2014-2015 Ram 1500 Laramie 2014-2015 Ram 1500 Laramie Limited 2014-2015 Ram 1500 Laramie Longhorn 2015...

BladeRunner 3 IN Aluminum Hot and Cold Charge Pipe Kit Black GM Diesel Trucks 02-04 V8-6.6L (td) LB7This Part Fits: Year Make Model Submodel 2002-2004 Chevrolet Silverado 2500 HD Base 2002-2004 Chevrolet Silverado 2500 HD LS 2002-2004 Chevrolet Silverado 2500 HD LT 2004 Chevrolet...

This BladeRunner Charge Pipe kit delivers more flow and is more robust to handle higher horsepower and boost than the plastic factory Charge Pipe on the 2017-18 GM L5P diesel. TIG-welded and designed from aircraft-grade, mandrel bent aluminum tubing, the BladeRunner I/C tube features...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...

BladeRunner 3 IN Aluminum Hot and Cold Charge Pipe Kit Black Dodge RAM Diesel Trucks 13-18 L6-6.7L (td)This Part Fits: Year Make Model Submodel 2013-2018 Ram 2500 Big Horn 2013-2018 Ram 2500 Laramie 2014-2015 Ram 2500 Laramie Limited 2013-2018 Ram 2500 Laramie Longhorn 2016-2018...

Bladerunner Intercoolers represent the next generation of intercoolers. The Bladerunner intercoolers utilize a 3 in. bar and plate design that out performs OE style tube and fin core designs. The end tanks are constructed out of 3/16 in. TIG welded aluminum plate tanks that...

Flow and Performance: Constructed of mandrel bent, powder-coated aluminum tubing for maximum flow. The smooth transition bends decrease turbulence and minimize pressure loss, increasing horsepower, torque and lowering EGT's. Perfect Fit: Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes...

Flow and Performance: Constructed of 3" mandrel bent, powder-coated aluminum tubing for maximum flow. The smooth transition bends decrease turbulence and minimize pressure loss, increasing horsepower, torque and lowering EGT's. Installs on the Hot Side to transfer heated air smoothly to the intercooler to...

Advanced FLOW engineering (aFe) is a manufacturer of automotive cold air intake systems, performance air filters, fluid filters, intake manifolds turbochargers, programmers, throttle body spacers and exhaust systems. aFe was founded in 1999 and is headquartered in Corona, California, USA, in two facilities totaling...

Flow and Performance: Constructed of mandrel bent, powder-coated aluminum tubing for maximum flow. The smooth transition bends decrease turbulence and minimize pressure loss, increasing horsepower, torque and lowering EGT's. Perfect Fit: Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes...

BladeRunner 3 IN Aluminum Hot and Cold Charge Pipe Kit Black Ford Diesel Trucks 03-07 V8-6.0L (td)This Part Fits: Year Make Model Submodel 2004-2005 Ford Excursion Eddie Bauer 2004-2005 Ford Excursion Limited 2004-2005 Ford Excursion XLS 2004-2005 Ford Excursion XLT 2004-2007 Ford F-250 Super...

BladeRunner 3 IN Aluminum Hot Charge Pipe Black GM Diesel Trucks 01-04 V8-6.6L (td) LB7This Part Fits: Year Make Model Submodel 2001-2004 Chevrolet Silverado 2500 HD Base 2001-2004 Chevrolet Silverado 2500 HD LS 2001-2004 Chevrolet Silverado 2500 HD LT 2004 Chevrolet Silverado 2500 HD...

Flow and Performance: Constructed of 3" mandrel bent, powder-coated aluminum tubing for maximum flow. The smooth transition bends decrease turbulence and minimize pressure loss, increasing horsepower, torque and lowering EGT's. Installs on the Hot Side to transfer heated air smoothly to the intercooler to...

Advanced FLOW engineering (aFe) is a manufacturer of automotive cold air intake systems, performance air filters, fluid filters, intake manifolds turbochargers, programmers, throttle body spacers and exhaust systems. aFe was founded in 1999 and is headquartered in Corona, California, USA, in two facilities totaling...

The aFe intercooler tube represents the next generation of Diesel performance products. This intercooler tube produced 16hp and 49lbs. x ft. of torque on the dyno while out flowing the factory intercooler tube by 67-percent. Not only will you get increased performance but you...

The aFe Bladerunner intercooler tubes produce 20 hp and 63 lbs./ft/ torque and outflow the factory tubes by 45 percent. With the increased flow of this intercooler tube it will reduce you exhaust gas temperatures by 100 deg..This Part Fits: Year Make Model Submodel...

aFe Powers intercooler tubes are constructed from mandrel-bent aluminum tubing for maximum flow then, powder-coated for a nice finish. The high-temp wrinkle-black powder-coating also insulates the tubes from engine heat and protects the tube from corrosion. The smooth transitional bends decrease turbulence and minimize...

Perfect Fit: Includes stainless steel clamps for a leak-free seal and heavy-duty 5-Ply polyester reinforced silicone hump coupling for strength. Mandrel-bent Tubing: Constructed of 2-1/2" to 3" mandrel-bent aluminum tubing then powder-coated wrinkle-black for heat and corrosion resistance. The smooth transition mandre l bends...

aFe Powers intercooler tubes are constructed from mandrel-bent aluminum tubing for maximum flow then, powder-coated for a nice finish. The high-temp wrinkle-black powder-coating also insulates the tubes from engine heat and protects the tube from corrosion. The smooth transitional bends decrease turbulence and minimize...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...

The Bladerunner charge pipe represents the next generation of Diesel performance products. This Charge Pipe produced 16hp and 49lbs. x ft. of torque on the dyno while out flowing the factory Charge Pipe by 67-percent. Not only will you get increased performance but you...

The aFe Power 3-1/2 intercooler tube represents the next generation of Diesel performance products. This intercooler tube transitions from a 3-1/2 diameter to 3 to fit the factory intercooler for an improved response. This kit comes complete with a 3.5 mandrel bent powder-coated stainless...

The Bladerunner charge pipes produce 20 hp and 63 lbs./ft/ torque and outflow the factory tubes by 45 percent. With the increased flow of this Charge Pipe it will reduce you exhaust gas temperatures by 100 deg..This Part Fits: Year Make Model Submodel 2015-2016...

BladeRunner 3 IN Aluminum Hot and Cold Charge Pipe Kit Black GM Diesel Trucks 11-16 V8-6.6L (td) LMLThis Part Fits: Year Make Model Submodel 2015-2016 Chevrolet Silverado 2500 HD High Country 2011-2016 Chevrolet Silverado 2500 HD LT 2011-2016 Chevrolet Silverado 2500 HD LTZ 2011-2016...

The Bladerunner charge pipes produce 20 hp and 63 lbs./ft/ torque and outflow the factory tubes by 45 percent. With the increased flow of this Charge Pipe it will reduce you exhaust gas temperatures by 100 deg..This Part Fits: Year Make Model Submodel 2016-2022...

The ATLAS exhaust race pipe is engineered to perform in the most extreme environments. This system is constructed from 4" mandrel-bent aluminized tubing for maximum flow, increased horsepower, increased torque and lower EGTs. The ATLAS exhaust race pipe is the perfect combination of performance,...

BladeRunner 3 IN Aluminum Hot and Cold Charge Pipe Kit Red Dodge RAM 1500 EcoDiesel 14-18 V6-3.0L (td)This Part Fits: Year Make Model Submodel 2014-2015 Ram 1500 Big Horn 2014-2015 Ram 1500 Laramie 2014-2015 Ram 1500 Laramie Limited 2014-2015 Ram 1500 Laramie Longhorn 2015...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...

BladeRunner 3 IN Aluminum Hot and Cold Intercooler Tube Kit Black Dodge Diesel Trucks 13-18 L6-6.7L (td)This Part Fits: Year Make Model Submodel 2013-2018 Ram 2500 Big Horn 2013-2018 Ram 2500 Laramie 2014-2015 Ram 2500 Laramie Limited 2013-2018 Ram 2500 Laramie Longhorn 2016-2018 Ram...

Perfect Fit: Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes high quality stainless steel clamps and heavy-duty 5-Ply couplings for strength. Fits OEM intercooler. Flow and Performance: This aFe Power int ercooler tube is constructed from 3" (Hot Side)...

This BladeRunner intercooler tube kit delivers more flow and is more robust to handle higher horsepower and boost than the factory intercooler tubes on the 2017-2019 GM L5P diesel. TIG-welded and designed from aircraft-grade, mandrel bent aluminum tubing, the BladeRunner I/C tube kit features...

Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This charge pipe kit provides a smooth transition between the turbo and the engine for lower operating temperatures and increased power.This kit includes high-quality, stainless-steel, SmartSeal clamps...

Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This charge pipe kit provides a smooth transition between the turbo and the engine for lower operating temperatures and increased power. This kit includes high-quality, stainless-steel, spring-loaded...

Smooth transitions in the mandrel-bent aluminum tubing decrease turbulence and minimize pressure loss, increasing horsepower and torque. This pipe kit includes high-quality, stainless-steel, spring-loaded T-bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings. This charge pipe kit features factory style billet aluminum quick-connect adapter...

Smooth transitions in the mandrel-bent aluminum tubing decrease turbulence and minimize pressure loss, increasing horsepower and torque. The BladeRunner charge pipe kit provides a smooth transition between the turbo and the engine for lower operating temperatures and increased power. This charge pipe kit includes...

Smooth transitions in the mandrel-bent aluminum tubing decrease turbulence and minimize pressure loss, increasing horsepower and torque. The BladeRunner I/C tube kit provides a smooth transition between the turbo and the engine for lower operating temperatures and increased power. This tube kit includes high-quality,...

BladeRunner Charge Pipes provides a smooth transition between the turbo and the engine for lower operating temperatures and increased power. This kit includes high-quality, stainless-steel, spring-loaded T-bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings, and factory style billet aluminum quick-connect adapters with o-ring...

BladeRunner 2-1/2 IN & 3 IN Aluminum Hot and Cold Charge Pipe Kit Black GM Colorado/Canyon 16-22 L4-2.8L (td) LWNThis Part Fits: Year Make Model Submodel 2016-2022 Chevrolet Colorado LT 2016-2022 Chevrolet Colorado WT 2016-2022 Chevrolet Colorado Z71 2017-2022 Chevrolet Colorado ZR2 2018-2020 GMC...

Bladerunner Intercoolers represent the next generation of intercoolers. The Bladerunner intercoolers utilize a 3 IN bar and plate design that out performs OE style tube and fin core designs. The end tanks are constructed out of 3/16 IN TIG welded aluminum plate tanks that...

Perfect Fit: Includes stainless steel clamps for a leak-free seal and heavy-duty 5-Ply polyester reinforced silicone hump coupling for strength. Mandrel-bent Tubing: Constructed of 2-1/2" to 3" mandrel-bent aluminum tubing then powder-coated wrinkle-black for heat and corrosion resistance. The smooth transition mandrel bends decrease...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...